Yanmar 3HM User Manual download pdf (Page 20)

V1. Starting the new engine for the first time

Important !

Before starting the engine for the first time check carefully the following

preparations.

[6-1.] Supply of fuel oil

1) Fill fuel into the fuel tank. When you feed fuel from storage tank, put the inlet of the syphon

at the middle of the storage tank. Take care not to draw unwanted materials floating on the fuel

surface or depositing in the bottom.

2) Draining the fuel tank. Be sure to equip the fuel tank with a precipitation tank, as shown in the

figure, and install a drain cock to remove any dirt and water that accumulate. Before starting the

engine. open the drain cock to remove any precipitation and dirt.

1. Precipitation Tank

2. Drain Cock

[6-2.] Supply of lubricating oil

1) Lube oil to the crankcase

1-a)

Remove the lube oil supply port (yellow cap) and supply approved lube oil.

FOR 1GM

1. Oil Supply Port

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

No comments

Yanmar 3HM User Manual Page 20