Yanmar 6CXM-GTE2 Specifications download pdf (Page 40)

5.2.3 Inspection Every 250 Hrs,

or 1 year.

(1) Replacing the Fuel Filter

Replace the fuel filter periodically before there is

clogging and the fuel flow is reduced.

Close the fuel cock of the fuel tank.

2 Turn the fuel filter to the left with the filter wrench

and remove.

3 Clean the attachment face for the filter.

4 Turn the new filter to the right until it contacts the

attachment face. After tightening by hand, use

the filter wrench to tighten it another 3/4 of a turn.

(Tightening torque: 11.8~17.7 Nm/1.2~1.6kgm)

5 Bleed the fuel system.  See 3.2.2.

(2) Replacing Cooling Water

Cooling performance drops when the cooling water

is contaminated with rust and scale. Even if antifreeze

or antirust is added, the cooling water must be

periodically replaced because the properties of the

agent will degenerate. Replace the cooling water

periodically.

• Draining the Cooling Water  See 4.8.1 (2)

• Supplying Cooling Water  See 3.4

(3) Replacing the Engine Oil and Lube Oil

Filter (2nd time & after)

After the second oil change, the engine oil should be

replaced after every 250 hours. Replace the lube oil

filter at the same time.  See 5.2.1 (1)

Maintenace & Inspection

MARINE DIESEL ENGINE 6CXM-GTE2

Fuel filter

Drain plug

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 49 50

No comments

Yanmar 6CXM-GTE2 Specifications Page 40