Yanmar 4JH45 Specifications download pdf (Page 44)

BEFORE YOU OPERATE

38 JH Series Operation Manual

Figure 5

Handling Engine Oil

1. When handling and storing engine oil,

be careful not to allow dust and water to

contaminate the oil. Clean around the

filler port before filling.

2. Do not mix lube oils of different types or

brands. Mixing may cause the chemical

characteristics of the oil to change and

lubricating performance to decrease,

reducing the engine’s life.

3. Engine oil should be replaced at the

specified intervals, regardless if the

engine has been operated.

Engine Oil Viscosity

SAE 10W-30 or SAE 15W-40 are the

recommended oil viscosities.

If you operate your equipment at

temperatures outside the limits shown,

consult your authorized Yanmar dealer or

distributor for special lubricants or starting

aids.

Checking the Engine Oil

Figure 6

1 – Engine oil filler port cap

(On the rocker arm cover)

2 – Engine oil filler port cap

(On the gearcase)

3–Dipstick

4 – Upper Limit

5 – Lower Limit

Note: 4JH45/57 shown. Other models

are similar.

1. Make sure the engine is level.

2. Remove dipstick (Figure 6, (3)) and

wipe with clean cloth.

3. Fully reinsert dipstick.

4. Remove dipstick. The oil level should

be between upper (Figure 6, (4)) and

lower (Figure 6, (5)) lines on the

dipstick.

5. Add oil if necessary. See Adding

Engine Oil on page 39.

6. Fully reinsert dipstick.

056900-00X00

4JH45_4JH57_4JH80_4JH110_EN_OPM.book 38 ページ２０１３年１０月８日　火曜日　午後３時５８分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 125 126

Comments to this Manuals

No comments

Yanmar 4JH45 Specifications Page 44

Comments to this Manuals

Related products and manuals for Engine Yanmar 4JH45