Yanmar 6CXM-GTE2 Service Manual download pdf (Page 86)

- 3-40 -

7) Hook the governor spring on the pin of the governor lever

and control lever.

8) Insert the rack link in the governor link, hook the link con-

necting spring on the spring pin of the governor link side

with the spring set bar, and connect the governor link with

the rack link.

9) Fit the link connecting spring to the spring pin at the rack

link with the spring set bar by pushing the rack link into

the governor link.

10)Mount the governor case to the fuel pump unit, lightly

tapping it with a wooden hammer, and tighten the bolts.

11) Mount the governor case cover.

12)Insert the control lever to the control lever shaft, and

tighten the nut.

Note:

Move the control lever back and forth to make

sure that the entire link moves smoothly.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 131 132

No comments

Yanmar 6CXM-GTE2 Service Manual Page 86