Yanmar 6CXM-GTE2 Service Manual download pdf (Page 85)

- 3-39 -

3.11.6 Reassembly of governor

Inspect all parts after disassembly and replace any parts as

necessary. Before starting reassembly, clean both the new

parts and parts to be reused, and put them in order.

Be sure to readjust the unit after reassembly to obtain the

specified performance.

1) Insert the governor weight assembly to the taper portion at

the end of the fuel camshaft.

Fix it by the hole of the fuel pump coupling or by holding

the coupling with a vise.

Mount the conical spring washer, and tighten the governor

weight nut.

2) Open the governor weight and insert the sleeve in the end

of the fuel camshaft.

3) When the control lever shaft has been removed, lightly tap

the control lever shaft and washer from inside the gover-

nor case, using an appropriate plate.

4) Mount the governor link to the governor lever assembly.

5) Put the governor lever shaft assembly in the governor

case, insert the governor lever shaft until the O-ring

groove come out from the opposite side of the governor

case, and fit the O-ring.

6) After mounting the O-ring, tap the governor lever in the

opposite direction, and mount the E-shaped stop rings on

the grooves at both ends.

Governor weight tightening torque

59 - 69 N-m

(6 - 7 kgf-m)

Note: Make sure that the sleeve moves smoothly after

insertion.

Note:

1.Make sure that the correct governor link

mounting holes are used, and that it is

mounted in the correct direction.

2.Make sure that the governor link moves

smoothly.

Note:

1.Fit the O-ring to the side you tapped it in

from.

2.Coat the O-ring with the silicon oil for protec-

tion during insertion.

3.Don't forget to place washers on both sides of

the governor lever.

Note:

After mounting the governor lever assembly,

make sure that it moves smoothly.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 131 132

Comments to this Manuals

No comments

Yanmar 6CXM-GTE2 Service Manual Page 85

Comments to this Manuals

Related products and manuals for Engine Yanmar 6CXM-GTE2