Yanmar 6CXM-GTE2 Service Manual download pdf (Page 93)

- 3-43-5 -

16) Insert the plunger barrel in the deflector and barrel

collar. Align the hole in the barrel with the hole in

the collar, then set the straight pin in the holes of the

barrel and collar to fix them.

17) Insert the pinion in the spring shoe and install the

spring shoe on the barrel collar. Secure the spring

shoe with the straight pins.

18) Insert the clip ring into the groove in the pinion.

19) Install the plunger spring.

20) Hook the neck of the plunger to the spring retainer,

align the plunger flange with the slots in the pinion

and push the plunger until it is locked by the clip ring

on the pinion.

21) Place a shim around each stud bolt.

22) Align the grooves in the pinion and spring shoe.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 131 132

No comments

Yanmar 6CXM-GTE2 Service Manual Page 93