Yanmar 4LHA-STZP Specifications download pdf (Page 32)

⑥Check the rubber hose connecting the subtank

to with the fresh water tank. If the hose is not

water-tight a lot of coolling water will be con-

sumed.

filler cap

3.6 Cranking

When the engine is being used for the first time or if it has not been used for a long period of time,

perform cranking before starting to distribute oil to all of the parts. Using an engine which has

been stored for a long period of time without the cranking procedure may result in engine seizure,

since there will no longer be oil on the moving parts after storage.

① Open kingston cock (optional).

② Put marine drive in NEUTRAL

③ Crank the engine.

Push the stop button to stop fuel injection

while cranking.

1) Put the key into the starter switch.

2) While pushing the stop button, turn the key

to the START position and hold it there.

The engine will begin turning.

If you remove your hand from the stop

button, the engine will start. Do not take

your hand off the button.

④ Continue cranking the engine for about 5 sec-

onds, checking for abnormal sounds.

⑤

Return the key to the

OFF

position. The engine

will stop.

MT-3

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 66 67

No comments

Yanmar 4LHA-STZP Specifications Page 32